V80 firmware for Philippine version V.4.10 release.
This version will improve the system stability.
Important Notes:
1. Please make sure the battery is fully charged before upgrading to avoid any disruption during upgrade process.
2. Please DO NOT terminate the utility or disconnect the USB cable during upgrading. If the connection is disconnected accidently, please unplug the battery and plug in again and repeat the previous upgrade steps.
3. The upgrade process would take approximately 3 to 5 minute, please be patient.
Upgrade Steps
1. Connect the USB Cable to your computer.
2. Make sure the mobile phone is turned off and the the other side of USB cable is NOT connected to your phone yet.
3. Click the "Upgrade" button to start the connecting session.
4. Press and hold down the number "1" button on the phone, then insert the USB cable into the phone. The upgrade utility would start searching for COM Port automatically. Once the COM port is found, it will start to upgrade the firmware.
5. If the COM Port searching is failed after 15 to 30 seconds, please unplug the battery and repeat from step 1.
6. When a popup message shows "Upgrade Compele",it indicates the upgrade process is completed. Please click "Quit" to exit the utility.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
